Corner Movers AR Series
▲ Low level corner bogies essentially used to move awkward rectangular loads.
▲ Give mobility in locations where normal equipment for such handling cannot be used.
▲ Easy to position-lift one side of load by a transport jack and slide in corners, then repeat for other side.
▲ Load platform covered with ribbed rubber for load protection.
▲ AR100A and AR100B are made of casting aluminum.
▲ AR150 frame is made of press steel.
▲ 3pcs ball bearing castors in each corner mover.
▲ Sold in one set (4pcs) only.
| Model | AR100A | AR100B | AR150 | |
| Max. Load Each | (kg) | 100 | 100 | 150 |
| Castor Diameter | (mm) | Ф50×20 | Ф50×20 | Ф50×20 |
| Load Height | (mm) | 15 | 15 | 15 |
| Overall Size | (mm) | 305×165×85 | 195×165×85 | 366×204×85 |
| Frame Material | Aluminium | Aluminium | Steel | |
| Net Weight Per Set | (kg) | 5.6 | 4.8 | 8 |
Send your message to us:
Write your message here and send it to us
